Looking for a Suzuki ABS pump, ABS control module, ESP module or complete ABS hydraulic unit?
Suzuki vehicles use ABS together with ESP/ESC (Electronic Stability Control) and traction control systems. A faulty ABS hydraulic pump or electronic control module can cause ABS, ESP and traction control warning lights, hydraulic pump faults, wheel speed sensor faults and communication problems.
At AutoPulse247, we supply genuine used OEM Suzuki ABS pumps, ABS control modules and complete ABS/ESP hydraulic units for a wide range of Suzuki vehicles.
Our stock may include ABS pumps and modules for:
Suzuki Swift, Vitara, Grand Vitara, SX4, SX4 S-Cross, S-Cross, Jimny, Ignis, Alto, Splash, Baleno, Celerio, Kizashi, Wagon R+ and other Suzuki models.
Different ABS units can be fitted to vehicles of the same model, engine and production year. Always compare the complete part number from your original ABS unit before purchasing.
A faulty Suzuki ABS pump or control module may cause:
Suzuki uses different ABS/ESP systems depending on the model and production year. Exact definitions should always be confirmed for the specific vehicle.
C1022 / C1026 – Wheel Speed Sensor Related Faults
Can indicate an incorrect or missing wheel speed signal. Check the sensor, wiring, connector and wheel bearing/encoder before suspecting the ABS pump.
C1032 / C1036 – Wheel Speed Sensor Related Faults
Can be associated with another wheel speed sensor circuit or signal depending on the Suzuki model and ABS system.
C1061 – ABS Pump Motor / Motor Circuit Fault
Can indicate a problem with the ABS hydraulic pump motor, power supply, wiring or internal ABS hydraulic unit.
C1071 – ABS / ESP Control Module Internal Fault
On applicable Suzuki systems, this can indicate an internal ABS/ESP control unit malfunction.
C1091 – ABS Hydraulic System / Pump Related Fault
Depending on the ABS generation, this can relate to hydraulic or pump operation and requires system-specific diagnosis.
C1122 – ABS / ESP Sensor or Hydraulic System Related Fault
The exact definition varies between Suzuki ABS systems and should be confirmed using model-specific diagnostic information.
U0121 – Lost Communication With ABS Control Module
Communication with the ABS/ESP module has been lost. Possible causes include wiring, CAN Bus, power supply, ground connection or an internal module failure.
U0415 – Invalid Data Received From ABS Control Module
Another vehicle control module has received invalid information from the ABS/ESP system.
C1061 can be particularly relevant when diagnosing a Suzuki ABS hydraulic pump problem.
Possible symptoms can include:
Possible causes can include the ABS pump motor, electrical wiring, power supply, connector or an internal hydraulic unit failure.
The electrical supply and wiring should be tested before replacing the complete ABS pump.
Not necessarily.
ABS and ESP warning lights can also be caused by:
If these external causes have been checked and diagnostics confirm an internal ABS module, hydraulic pump motor, pressure sensor or hydraulic unit failure, replacement or specialist repair may be required.
A Suzuki ABS/ESP assembly normally consists of:
ABS Hydraulic Block – regulates hydraulic brake pressure at individual wheels.
ABS Pump / Motor – generates hydraulic pressure required by the ABS and ESP systems.
ABS Electronic Control Module – processes information from wheel speed and other vehicle sensors and controls ABS, ESP and traction control functions.
Depending on the fault, the electronic module, pump motor or complete ABS hydraulic unit and control module assembly may need replacing.
Do not choose an ABS unit based only on:
Suzuki model + engine + production year.
Suzuki can use several different ABS systems within the same model range.
Your original unit may carry:
Suzuki OEM ABS numbers commonly use formats such as:
56110-xxxxx
56100-xxxxx
Other numbering formats may be used depending on the model and ABS generation.
Always compare the complete number, including all final digits and suffixes.
Two ABS units may look identical but have different software, electronics or hydraulic configurations.
The Suzuki Swift is one of the most common Suzuki models for ABS pump and module searches.
Different Swift generations can use different ABS systems depending on:
A visually identical ABS pump should therefore not automatically be assumed to be compatible.
We also supply used ABS pumps and modules for:
Suzuki Vitara
Suzuki Grand Vitara
Suzuki SX4
Suzuki SX4 S-Cross / S-Cross
Different drivetrain and stability-control configurations can affect ABS compatibility, especially on 4WD / AllGrip vehicles.
Always match the complete OEM and manufacturer part numbers.
Suzuki Jimny ABS units can vary considerably between generations.
When replacing a Jimny ABS unit, check the production year, complete OEM part number and ABS/ESP equipment rather than purchasing solely by vehicle model.
Depending on the model, a replacement ABS/ESP unit may require:
Requirements vary between Suzuki models and ABS generations.
AutoPulse247 supplies genuine used OEM Suzuki ABS pumps, ABS control modules and complete ABS/ESP hydraulic units.
Search our store using your:
Suzuki OEM part number, Bosch number, ATE/Continental number, Denso number, ADVICS number, ABS pump number or electronic module number.
Matching all available numbers from your original unit is the safest way to identify the correct replacement.
Send us:
Your Suzuki VIN + ABS/ESP fault codes + complete ABS part number + a clear photograph of the label on your original ABS pump/module.
We can use these details to help identify a suitable replacement from our available stock.
Important: ABS and ESP fault codes are provided for general diagnostic information. Exact definitions can vary between Suzuki models and ABS generations. A fault code alone does not confirm that the ABS pump or control module is defective. Proper diagnostic testing should always be performed before replacing braking-system components.
