Looking for a Nissan ABS pump, ABS control module, ESP module, VDC module or complete ABS hydraulic unit?
Nissan vehicles use ABS together with VDC (Vehicle Dynamic Control), ESP/ESC and Traction Control (TCS). A faulty ABS hydraulic pump or electronic control module can cause ABS, VDC, ESP and traction control warning lights, pump motor faults, brake pressure sensor faults and communication problems.
At AutoPulse247, we supply genuine used OEM Nissan ABS pumps, ABS control modules and complete ABS/VDC hydraulic units.
Our stock may include ABS pumps and modules for:
Nissan Qashqai, Juke, X-Trail, Micra, Note, Navara, Pathfinder, Leaf, Pulsar, Primera, Almera, Murano, 350Z, 370Z, GT-R, NV200, NV300, NV400 and other Nissan models.
This includes popular generations such as Qashqai J10/J11/J12, Juke F15, X-Trail T30/T31/T32, Navara D40/NP300 and Micra K12/K13/K14.
Different ABS units can be fitted to vehicles of the same model and year, so always compare the complete original part number before purchasing.
A faulty Nissan ABS pump or control module may cause:
Exact Nissan fault-code definitions vary by model and ABS/VDC generation. Commonly encountered ABS-related codes include:
C1101 / C1102 / C1103 / C1104 – Wheel Speed Sensor Related Faults
Can indicate an incorrect or missing wheel speed signal. The wheel sensor, wiring, connectors and wheel bearing encoder should be checked before suspecting the ABS pump.
C1105 / C1106 – Wheel Speed Sensor / Signal Faults
On applicable Nissan systems, these can also relate to wheel speed sensor circuits or signals.
C1110 – ABS Controller / ABS System Fault
Can indicate a fault detected within the ABS/VDC control system. The exact diagnostic meaning should be confirmed for the specific Nissan model.
C1111 – ABS Pump Motor / Motor Circuit Fault
Can be associated with the ABS hydraulic pump motor, electrical supply, wiring or internal ABS hydraulic unit on applicable systems.
C1115 – Wheel Speed Sensor / ABS Signal Related Fault
Definition can vary according to Nissan model and ABS generation.
C1130 – Engine Signal / ABS-VDC Communication Fault
A frequently encountered Nissan code. It can occur when the ABS/VDC module detects a problem with information received from the engine control system. C1130 does not automatically mean the ABS pump is defective.
C1142 / C1143 – Steering Angle Sensor Related Fault
Can indicate steering angle sensor signal or calibration problems affecting the VDC system.
C1155 – Brake Fluid Level / Brake System Related Fault
The exact definition depends on the Nissan model and braking system.
U1000 – CAN Communication Circuit Fault
A common Nissan communication code indicating a CAN Bus communication problem between vehicle control modules.
U0121 – Lost Communication With ABS Control Module
Communication with the ABS/VDC control module has been lost. Possible causes include wiring, power supply, ground, CAN Bus or an internal control module failure.
U0415 – Invalid Data Received From ABS Control Module
Another control module has received invalid information from the ABS/VDC system.
C1130 is one of the commonly searched Nissan ABS/VDC-related codes.
It may appear together with:
Importantly, C1130 does not necessarily indicate a defective ABS pump. The ABS/VDC module may be reporting a problem with information received from the engine management system.
Engine ECU fault codes should therefore also be checked before replacing the ABS unit.
On applicable Nissan ABS systems, C1111 can be associated with ABS pump motor operation or its electrical circuit.
Possible symptoms can include:
Possible causes can include the ABS pump motor, wiring, connector, power supply or internal ABS hydraulic unit.
Proper electrical testing should be performed before replacing the complete unit.
Not necessarily.
ABS, VDC and SLIP warning lights can also be caused by:
If these causes have been checked and diagnostics confirm an internal ABS module, hydraulic pump motor, pressure sensor or hydraulic control unit failure, replacement or specialist repair may be required.
A Nissan ABS/VDC assembly normally consists of:
ABS Hydraulic Block – regulates hydraulic brake pressure at individual wheels.
ABS Pump / Motor – generates hydraulic pressure when required by the ABS and stability systems.
ABS / VDC Electronic Control Module – processes wheel speed and other vehicle information and controls ABS, VDC and traction control.
Depending on the fault, the electronic module, hydraulic pump or complete assembly may require replacement.
The Nissan Qashqai is one of the most popular Nissan models for ABS pump and module searches.
This includes:
Qashqai J10
Qashqai J11
Qashqai J12
Different engines, drivetrains and production dates can use different ABS/VDC units.
A unit that looks identical should not automatically be considered compatible.
ABS units can also vary substantially between:
Nissan Juke F15
Nissan X-Trail T30
Nissan X-Trail T31
Nissan X-Trail T32
2WD and 4WD configurations may use different ABS/VDC systems.
Always compare the complete OEM and manufacturer part numbers.
Nissan Navara ABS units can vary according to generation, drivetrain and vehicle specification, including:
Navara D40
Navara NP300 / D23
For 4WD vehicles in particular, never assume compatibility based only on appearance.
Electric vehicles such as the Nissan Leaf can use braking systems that interact with regenerative braking and other EV control systems.
When replacing a Nissan Leaf ABS unit, always identify the exact part number and confirm the correct version for the vehicle.
Do not choose a replacement ABS unit based only on:
Nissan model + engine + production year.
The original unit may carry several identification numbers, including:
Nissan ABS part numbers frequently use formats beginning with:
47660-xxxxx
47600-xxxxx
Other number ranges are also used depending on the model and system.
Always match the complete number, including the suffix and final digits.
Two ABS pumps can look virtually identical but have different electronics, software or hydraulic configurations.
Depending on the model, a replacement ABS/VDC unit may require:
Programming requirements vary between Nissan models and ABS generations.
AutoPulse247 supplies genuine used OEM Nissan ABS pumps, ABS control modules and complete ABS/VDC hydraulic units.
Search our store using your:
Nissan OEM part number, Bosch number, ATE/Continental number, Hitachi number, ADVICS number, ABS pump number or electronic control module number.
Matching the complete numbers from the original unit is the safest way to identify the correct replacement.
Send us:
Your Nissan VIN + ABS/VDC fault codes + complete ABS part number + a clear photograph of the label on your original ABS pump/module.
We can use these details to help identify a suitable replacement from our available stock.
Important: ABS/VDC fault codes are provided for general diagnostic information. Exact definitions can vary between Nissan models and ABS generations. A fault code alone does not confirm that the ABS pump or control module is defective. Proper diagnostic testing should always be carried out before replacing braking-system components.
